Set up the store computers: printers, cash drawer and card reader
The Terminals screen (in Settings) lets the ERP use what is plugged into the computers in your store: the printer, the receipt printer, the cash drawer and the card reader. Normally you hardly have to touch anything: the computers appear by themselves and each one prints on its Windows default printer.
What is the Terminals screen for?
For three things. Seeing which store computers are connected to the ERP. Saying which printer each document comes out on at each computer, and which one is its receipt printer. And testing the receipt printer, the cash drawer and the card reader without making any sale.
What the screen replies when you click a button —site created, test receipt sent, an error— appears in a fixed notice at the top of what you are looking at, even if you have scrolled down the page. You close it with the cross on its right.
This screen is about the store computers. The tablets that show the price to the customer or are used to count stock are set up on another screen, Price checker and stock: it is in add and pair a terminal.
What are a terminal, a site and this workstation?
They are the three words the screen uses, and the screen itself explains them at the top, in What is this screen for?
- A terminal is a store computer that has the local agent installed: a small Powergest program that sits next to the Windows clock. Thanks to it, the ERP can print on that computer without asking, open its cash drawer or read its card reader.
- A site is each store, premises or warehouse of your company. Each terminal belongs to a site.
- This workstation is the computer you are looking at the screen from at that moment.
How to install it is in install the counter program. Without it, the ERP works just the same, but each document opens in the browser so you can print it by hand. With it, you also have to choose Direct printing when printing the document: out of the box, the ERP always shows the preview.
How does a new computer appear in the list?
By itself. When the agent is installed on a computer, that computer appears in the Terminals list within a few seconds, ready to use. You only need at least one site to exist: the Sites block shows the ones there are; if there are none, type its name in New site name and click Create site. The site created appears in the list straight away.
If your installation has automatic registration turned off, the computer waits in the Awaiting approval block. To accept it:
- Check its name in Name.
- Choose its Site.
- Tick what it is used for: Print, Card reader or Assistant (AI).
- Click Approve.
The computer is ready within a few minutes, without typing any code. If you don’t recognise it, click Reject.
The tick box that decides this is folded away in Advanced options, in Automatic computer registration. It comes ticked.
What does the status of each terminal mean?
Each computer is a card with a coloured badge:
| Badge | What it means |
|---|---|
| Connected (green) | The agent is running on that computer right now. The ERP can send it jobs |
| Disconnected (grey) | The computer is switched off, has no network or has the agent closed. Whatever is printed for it opens in the browser |
| Not paired (amber) | The terminal exists in the list, but no computer has connected to it yet |
The card also says what the computer is used for, when it last connected, which version of the agent it has and which machine it is. If New version available appears, the agent updates itself over the next few hours.
How do I tell the ERP which computer this is?
You have to do it once on each computer that is going to print without asking. That way the ERP knows which printers to use for what is printed from that computer, and the POS knows which till, which cash drawer and which receipt printer are its own.
- Open the ERP on that computer and go to Terminals.
- In This workstation, choose the terminal in This computer is.
- Click Set this workstation.
The page reloads and This computer is shows the terminal you set. Every time you come back to Terminals from that computer, you will see it there. From then on it applies to everyone who works on that computer. To undo it, click Remove.
The POS uses it too: on that computer it sells with the till, the cash drawer and the receipt printer of the terminal you set, even if other store computers are connected at the same time.
How do I choose the printer for each document?
In the Printers for each terminal block there is a table per computer, with one row per type of document: quote, order, sales order, delivery note, invoice and credit note.
- In the document’s row, choose one of that computer’s printers in Printer.
- If you want more than one copy, change it in Copies.
- If the printer has several trays, choose the one you want in Tray.
- Tick Landscape if the document should come out horizontally.
- Click Save on that row.
The Printer list is the one the computer itself says it has. Windows default, the first option, is the normal one: the document comes out on that computer’s default printer. The Tray list changes with the printer chosen; The usual one leaves the tray the printer uses.
If a saved printer is no longer on that computer, the list shows it with ‘(not on this computer)’: choose another one.
Why do I have to type the name of the printer?
Because the screen hasn’t received the list of printers for that computer. The list is sent by the computer itself when it connects with its program open. If it is switched off, if it hasn’t connected again since the ERP was updated, or if its counter program is a version that doesn’t send it, the table asks you to type the name and says so above it.
In the meantime, type the name exactly as it appears in Windows on that computer. You can see it in Start → Settings → Printers & scanners. If you get one letter wrong, the document doesn’t come out on any printer. If left empty, it comes out on the Windows default.
Where does the counter receipt come out?
On that computer’s Receipt printer, which you choose in the row above its table, in Printers for each terminal. Out of the box it is Windows default, and the option says in brackets which one it is. The same printer opens the cash drawer and prints the test receipt.
That row also has two fields for printers that don’t respond to the factory settings:
- Drawer opening: the numbers that open the cash drawer.
- Paper cut: the numbers that cut the paper at the end of the receipt.
They are written as in the Desktop ERP: numbers from 0 to 255 separated by spaces, for example 27 112 0 60 240. If left empty, the factory ones are used, which work for almost all receipt printers. Click Save on that row. If any number isn’t valid, nothing is saved and the notice says which one.
What you change here applies to the next receipt from that computer.
How do I test the receipt printer, the cash drawer or the reader?
On each computer’s card, in the Test line, there is one button per device. They only work with the computer Connected. If it isn’t, below the buttons you can read why they are greyed out: that the computer is switched off or has the agent closed, or that the agent needs to be installed on it.
| Button | What it does |
|---|---|
| Print test receipt | Prints a short receipt on the receipt printer. If it comes out, the printer is fine |
| Open cash drawer | Opens the cash drawer. The cash drawer is plugged into the receipt printer, not the computer |
| Read card | Asks you to swipe a card through the reader and shows what it has read |
None of them touches a sale or leaves any trace in the till.
What is in ‘More options’?
Each card has a More options button with what is rarely used, grouped by topic:
- Generate pairing code: gives a code to connect a computer to that terminal by hand. On the computer, you right-click the agent icon, next to the clock, choose Pair… and type the code. It is valid for 15 minutes. You only need it if the computer didn’t appear by itself.
- Turn on the assistant / Remove the assistant: makes that computer run the assistant for its store. It is only worth it on a powerful computer.
- Test the assistant: asks the assistant on that computer a test question, directly, and shows the answer in the fixed notice at the top, which you can see even if the page has been scrolled. It doesn’t use credits and isn’t kept in the history or in Latest questions to the assistant. You can only click it with the assistant turned on on that computer and the computer connected.
- Lend it to the shared assistant: also puts that computer at the service of the assistant for the whole system. It only appears with the assistant turned on. It isn’t normally used.
- Disconnect this computer (in red): instantly removes its permission to talk to the ERP. It is what you do if it is stolen or replaced by another. It has nothing to do with people’s passwords, which still log in the same way. To use it again you have to approve it or pair it again.
- Delete (in red): removes the terminal from the list.
Where is the till for each counter computer chosen?
Not on this screen. The till that each computer’s cash goes to is chosen in POS settings, in the Workstations section. From Terminals there is a direct link: What about the tills?
What are AI nodes?
An AI node is the store computer that runs the assistant locally, without sending the questions outside. Everything about the assistant is folded away at the bottom of the screen, in Assistant (artificial intelligence).
In AI nodes by site, the ERP chooses by itself, at each site, the most powerful computer that is connected. The Currently handled by column says which one it is. Normally you don’t have to touch anything. If you prefer a particular one to do it, choose it in Main computer (and, if you want, in Backup computer) and click Save. If that computer is switched off, the ERP chooses by itself again.
In the same folded section are Assistant actions (whether the assistant can do things in the company or only answer) and two lists to look things up: Latest assistant actions and Latest questions to the assistant. The technical side —the models each computer uses and who answered each question behind the scenes— is only seen by the support technician.
What can the assistant act on?
You decide it in Assistant actions, inside the Assistant (artificial intelligence) folded section:
- Tick The assistant can carry out actions if you want it to be able to do things (create documents, record receipts…). If unticked, it only answers.
- In Modules it can act in, tick the modules where you let it do things: for example Sales, POS and invoices or Receipts and payments. With none ticked, it can act in all of them.
- If you want, set a limit in Maximum actions per day per site (0 = no limit).
- Click Save.
If a module that no longer exists had been saved, it appears separately in amber with ‘doesn’t exist: remove’. Click it to remove it and save.
What do I do if something doesn’t work?
| What you see | Why | What to do |
|---|---|---|
| A computer doesn’t appear in the list | There is no site, or the agent isn’t installed or open on that computer | Create a site in the Sites block. If there already is one, ask the technician to check the agent |
| The computer is in Awaiting approval | Automatic registration is turned off | Click Approve on its row |
| The Test buttons are greyed out | The computer shows Disconnected or Not paired | Read the reason below the buttons. Switch it on and check that the agent icon is next to the clock |
| What I print opens in the browser | The output is set to preview (the factory setting), this computer isn’t set or it is disconnected | Tick Direct printing on the document, and click Set this workstation from that computer |
| In Printer you have to type the name instead of choosing it | The screen doesn’t have the list of printers for that computer | Switch the computer on with the agent open and come back in. In the meantime, type the exact name |
| The document doesn’t come out on any printer | The name typed in Printer doesn’t match the one in Windows | Choose it from the list, or copy it letter by letter from Printers & scanners, or leave it on the default |
| The receipt comes out on another printer | The computer doesn’t have its Receipt printer chosen and it comes out on the Windows default | Choose it in the row above its table and click Save |
| The receipt comes out but the cash drawer doesn’t open | The cash drawer isn’t plugged into the receipt printer, or it needs other numbers | Check the cash drawer cable. If it is fine, put the numbers the manufacturer gives in Drawer opening |
| ‘The cash drawer opening must be numbers from 0 to 255…’ when saving | There is something that isn’t a number from 0 to 255 | Type only numbers separated by spaces, or leave it empty for the factory ones |
| Test the assistant is greyed out | The computer doesn’t have the assistant turned on or isn’t connected | Turn it on in More options and check that it shows Connected |
| ‘The assistant has no actions in …’ when saving the actions | A module that doesn’t exist has been saved | Remove the module marked in amber and save again |
Back to store terminals.