Customise my home screen
Each person builds their own home screen: which cards they want, in which panel, in which order and at what width. These changes are yours alone: nobody else sees them. And they are per workspace: the home screen you build is that of the workspace you are in.
Where do I customise the home screen?
In the header of the home screen, click the Customise button. The Customise dashboard screen opens.
To the right of the title, a card says which home screen you are building: ‘Home of the workspace Sales’. With no workspace chosen it is that of Whole system.
Next to it, the How to use it · Mouse and keyboard button opens a window with the mouse gestures and keyboard shortcuts explained further down. Close it with the cross or by clicking outside.
The screen has four panels. The tools panel, on the left, lists all the cards your role reaches. In the centre, at the top, the top summary panel is the compact strip, and below it the main panel is the large grid, in the same order as on the home screen. The right panel (reports and tables), on the right, is the rail.
The main panel is drawn with the same grid as the home screen, so what you see here is what you will get there.
Changes aren’t saved automatically. You see them on the screen, but they are only applied when you click Save. If you change your mind, click Cancel and you leave without changing anything.
Only what your role grants you appears here. Adding or removing a card doesn’t change any permission: you only decide what you want to have in view.
How do I add or remove a card?
With the mouse, drag the card from the tools panel to the panel where you want it. To remove it, drag it back to the tools panel.
If the target panel is out of view, you don’t need to scroll the screen first. Drag the card and bring the mouse close to the top or bottom edge without releasing it: the screen scrolls by itself while you hold it there, and stops as soon as you move it away from the edge. The closer to the edge, the faster it goes.
The tools panel has three tabs, one per panel: Top, Main and Right. Each one only shows the cards that fit in its panel, and the number on the tab says how many there are. A card’s + button sends it to the panel of the open tab. On any card already placed, the cross removes it.
With the keyboard, Tab goes through the cards. With the focus on a card in the tools panel, Enter adds it to the panel of the open tab. With the focus on a card already placed, Alt+O removes it.
Each tab also shows what is already placed in its panel, in grey and without +. A card placed in one panel still appears in the other tabs: that way you can send to the Top tab a metric you already have in the main panel.
Removing a card doesn’t lose anything. It stays in the tools panel and can be added again whenever you want.
How do I change the order and width of the cards?
With the mouse, drag the card within its panel to the position you want.
With the keyboard, with the focus on the card: Alt+↑ moves it up one position and Alt+↓ moves it down.
Width only exists in the main panel. Each card has a button that cycles through the three widths: ¼ (a quarter of a row), ½ (half a row) and Row (the whole row). With the keyboard it is Alt+T.
In the top summary panel and in the right panel there is no width to choose, and that is why those cards don’t have that button. The strip shares out its figures equally and the rail stacks them.
The grid has four columns. Cards are placed in a row until it is full, and the last one in each row stretches so that there is no gap. That is why a ¼ card can look wider than its button says: it happened to close the row.
What is a row break and how do I remove it?
A row break forces a card to start a new row, even if there was still room in the row above. It shows as a line across the panel labelled row break.
The editor adds it by itself when it is needed. If you drop a card next to another and without the break it would move up to the row above, the break is added so that it stays where you left it.
To remove it, click the cross on the separator itself. The card goes back to the normal flow and moves up if it fits.
Breaks aren’t removed by themselves even if they are no longer needed. They stay because a later move may need them again, and a panel that rearranges itself confuses more than it helps.
Which cards does each panel accept?
Each panel accepts one kind of card, according to its shape. When you drag, a panel that doesn’t accept what you are carrying won’t take it.
The main panel accepts everything: metrics, charts, tables and lists.
The top summary panel only accepts metrics. The strip is a title and a figure, and a chart doesn’t fit.
The right panel (reports and tables) accepts tables, lists and pending items. The rail is narrow and tall, and what reads well there is what stacks downwards: a list of pending items fits just as well as a table.
The Suggestion card only accepts the main panel: it is a showcase and takes up the whole row.
The same metric can be in the top summary panel and in the main panel at the same time. It isn’t a mistake: the strip shows it at a glance and the main panel card also brings its chart and its comparison.
What happens to my layout when I change workspace?
Each workspace keeps its layout separately. If you build the Sales home screen, the Accounting one stays as it was, and so does the Whole system one.
A workspace you have never customised shows its default layout, which is different in each one: the Sales one is about sales and open work, the Accounting one about treasury and open items. What each one comes with is in The home screen.
A workspace you created by duplicating another starts with the original’s layout, and from then on goes its own way.
How do I choose the period it opens with and where ‘Net profit’ comes from?
In the header, next to the workspace card, there is a card with two selectors:
- Period on opening: Month (default), Quarter, Year or 12 months. It is the period the home screen opens with, for all the figures and charts. The buttons at the top of the screen change it while you look at it, without saving it.
- ‘Net profit’ comes from: Automatic (default: the accounts if your company keeps them in the program, and if not, the invoices), Accounting or Invoices (sales minus purchases, excluding VAT). It only appears if your role reaches that card.
Hover over each option to see what it means. It is saved with the same Save in the header and only affects you. More detail in The home screen and in Choose the period of the figures.
Restoring the dashboard doesn’t change either of them.
How do I choose a panel set?
A panel set is a ready-made home screen. In the header of the home screen, between the period and Customise, there is a drop-down with the sets your role can reach. Choose one and the home screen changes at once, only in the workspace you are in.
| Set | For whom |
|---|---|
| My day to day | Anyone: what needs doing today, without amounts |
| Learn the program | Those starting out: how each thing is done |
| Warehouse and purchasing | What to receive and restock, without amounts |
| Sales | Sales, trend, best customers and open work, without profit or cost |
| Administration | Receivables, due dates, treasury and what is pending collection |
| Management | Sales, collections and profit at a glance |
The last three carry financial figures. They don’t appear for anyone without the Home: financial figures permission.
If you had your own layout in that workspace, choosing a set deletes it, so it asks first. Default goes back to the workspace’s default home screen.
Here in Customise, the Start from a set row loads a set into the panels so you can adjust it. Like everything on this screen, it isn’t applied until you click Save. Once saved, it stops being the set and becomes your layout.
How do I put the screen back the way it was at the start?
Click the circular arrow button, Restore the default dashboard, to the left of Cancel in the header. The program asks for confirmation before doing anything and says which workspace’s layout it is going to bring back.
When you confirm, your customisation for that workspace is deleted. The home screen goes back to the default layout of the workspace you are in, with the cards your role reaches. What you have built in other workspaces isn’t touched.
Restoring affects all three panels at once, not just the main panel.
Your period on opening isn’t touched. Restoring returns the layout to its initial state, not the date window you look at your figures through.
It doesn’t affect anyone else. Each person has their own layout.
What happens if I lose access to a module?
If your role no longer reaches an area, its cards stop appearing on the home screen, even if you had them placed.
Your layout isn’t deleted. The card is kept exactly as it was, with its panel, its order and its width.
As soon as you get the permission back, the card goes back to its place by itself. You don’t have to place it again.
If your role doesn’t reach any card, the customisation screen says so and there is nothing to build.
See also: The home screen · Choose the period of the figures
More about Home
- How do I keep a record open next to the document?
- Choose the period of the figures
- Can I see the program in dark mode?
- The ERP home screen
- What is set up in Settings?
- The home screen
- What is ‘Setup’ and how do I read it?
- How do I read the help without leaving what I am doing?
- Notifications
- What does each status colour mean?
- How do I get back to where I was?