How do I move a deal through the pipeline?
Moving a card to another column is the central operation of the CRM: it changes the stage, leaves a trail for the statistics, recalculates its probability of closing and can trigger automations.

What do I need before I start?
To be a Member or Administrator of the board. An Observer sees the cards but can't drag them.
How is it done?
By dragging. Grab the card and drop it wherever you want:
- In a gap between two cards: it lands exactly there. While you drag, the gap where it would land is highlighted.
- Anywhere else in the column (the header, the add button, the space at the bottom): it lands at the end.
Dropping it in its own column reorders it. Dropping it outside any gap in its own column does nothing.
You can also move it to another column without dragging, from the Column drop-down of the open card. That way it always lands at the end of the destination column.
What happens when I move a card to another column?
Four things happen, in this order:
- The destination column is renumbered in full so that the card lands in exactly the right place.
- The move is noted in the board's activity log: ‘Card X moved from A to B’, with your name.
- The stage change is saved. That history is what later feeds the closing statistics.
- The destination column's automations run and that card's probability of closing is recalculated.
Reordering within the same column is simpler: the order changes and that's it. It leaves no trail in the log and doesn't trigger automations.
Who gets the card when I move it?
It depends on how the board is set under Owner assignment (the board menu, in CRM → CRM dashboard). With Choose owners when moving, dropping the card brings up Who is taking care of this? with two lists:
- In this column: the people who work in the destination column. That is the usual case and it comes open.
- Rest of the board: everyone else, collapsed. Click the heading and it opens.
Groups sits above both lists: ticking one hands the card to all of its people at once, and they also start working in that column. See having a group own the cards.
The dialog comes up with whoever already had it ticked: moving a card is not starting over. Add or remove whoever you want —more than one can take it on— and press Assign, which tells you how many ("Assign (2)"). Leave unassigned leaves it with nobody, taking off whoever had it.
If you tick somebody from the rest of the board, "joins the column" appears next to their name and a note below explains it: as well as taking that card, they start working in the column. From then on they are also included when the next cards arriving there are shared out.
That only happens with whoever you add now. Somebody who already had the card is not put into the column just because someone moves it: where each person works is their own decision.
With Share out automatically no dialog appears: the card goes to whoever has the least among the people working in the column. A card with several owners counts for each one of them.
And if the destination column belongs to a group, the sharing out happens among its people, with any of the three ways.
What is the notice that appears when moving?
When the board changes or removes whoever had the card, it says so with a notice at the top of the screen. Before, that only stayed in the board's log and whoever dragged the card never knew.
The notice stays until you choose something —it doesn't go away on its own—, and while it is open no other card can be dropped: it is about that move. What it offers depends on what happened:
| What happened | What you can do |
|---|---|
| Nobody takes care of the card any more | Put it back where it was, have those people work here, or choose who takes care of it |
| Someone dropped it and others kept it | Have the one who dropped it work here too, put it back, or leave it with whoever stayed |
| The board shared it out by itself | Accept whoever got it, put it back, or choose someone else |
| Nobody works in the column | Join the column yourself, or put it back |
Put it back where it was leaves it exactly as it was, in its place and with whoever had it, without sharing it out again.
Why does this deal have that percentage?
Open the card and look for Predicted prob. (AI) in the right-hand column. Under the percentage there is a link, Why this number, that expands the full calculation.
The percentage isn't an opinion, it is a sum. It is split across four signals, each with a cap of points, and the total is shown at the end:
- Pipeline stage: how many deals that got this far ended up being won, according to your own history. Until you have enough closed ones, a standard rate is used, and it says so.
- Time in stage: scores in full while the deal isn't stuck, and drops as it goes past the usual time.
- Amount: it doesn't subtract unless it is very high: large deals take longer to close.
- Recent contact: interactions with the contact in the last few days.
Each signal shows what it contributes out of its cap (for example, ‘4,5 / 45’) with a bar, so you can see at a glance which one is pulling the number down. Underneath, Total matches the percentage at the top.
This percentage is calculated automatically and feeds the board's monthly forecast and weighted pipeline. It is different from the Probability field, which you set by hand and nobody overwrites.
How do I record that it has been won or lost?
Open the card and use the Outcome drop-down in the right-hand column:
- Choose Won or Lost.
- If you choose Lost, a field appears where you can type the Loss reason. It is optional.
- Click Save outcome.
When you save it, the outcome date is recorded and that deal's probability becomes a fact: 100 % if it was won, 0 % if it was lost. It stops counting in the forecast and becomes part of the history used to estimate the others.
To reopen it, choose In progress and save: the reason and the outcome date are cleared, and the deal goes back to the pipeline as if nothing had happened.
The loss reason is only accepted with the Lost outcome.
Can the deal close by itself when it reaches a column?
Yes, and it is the usual setup on a sales board: you configure an automation ‘when the card reaches Closed / won, mark the deal as won’. It is explained in automate the pipeline.
Watch the difference: the card's completed box and the Outcome are different things. Marking the card as done doesn't mark it as won.
Why doesn't the order of the cards match the one I left?
If two cards ended up with the same position in a column (for example, because two people moved them at the same time), the order between them is undefined and may change when you reload.
It fixes itself: move any card in that column and saving renumbers the whole column.
If something goes wrong
| What you see | What has happened | What to do |
|---|---|---|
| The card can't be dragged | You went in as an Observer | Ask to be re-invited as a Member |
| The card moves to another column by itself | There is an automation set up on the destination column | Check them in the board menu |
| The card goes back to its place after reloading | The move wasn't saved | Repeat the move and check the activity log |
| ‘The deal already has that outcome recorded’ | The same outcome was saved twice | It was already there: there is nothing to do |
| ‘The loss reason only applies to the Lost outcome’ | A reason was typed with Won or In progress | Delete it before saving |
| The outcome changed without you touching it | An automation marked it when the card was moved | Check the board's automations |
See also: Add a deal · Automate the pipeline · View the sales forecast
More about CRM
- How do I ask the assistant to show me a screen?
- How do I make the board work on its own?
- How do I convert a contact into a customer?
- How do I create a board to run the pipeline?
- How do I add a contact?
- How do I add a deal?
- Why is my home screen the CRM dashboard?
- Why did the CRM ask me what I work on?
- How do I see only my own work or my department's?
- How do I store a contact's documents?
- How do I make a quote from the CRM?
- Follow up your customers with the CRM