Skip to content

Verifying and cleaning up mailing addresses

Verification checks whether the addresses in your address register exist, without sending them anything, and clean-up stops writing to the ones that don't. It's in Mailing → Verification, and each address can also be verified and cleaned up from its record. It's most useful before writing to an old list or one brought in from another tool: that way you avoid the bounces that make providers distrust your email account.

What's the point of verifying addresses?

Every email that bounces because the mailbox doesn't exist reduces trust in your email account. With lots of bounces, providers (Gmail, Microsoft 365…) start sending your emails to everyone's spam folder, including the people who do want them.

Verifying detects those addresses before sending them anything. It's especially useful with lists that haven't been used for a while, because people change jobs and mailboxes get closed.

How far can an address be checked?

There are three levels. They all start with the basic one, and each goes further than the previous one:

LevelWhat it checksWhat it costs
Basic: format and domainThat the address is written correctly and that its domain exists and receives emailNothing. It's quick
Query the mail serverIt also asks the recipient's server whether that mailbox exists, without sending any emailNothing, but it's slow. It must be allowed in your company and in the installation
ERP verification serviceAs well as the basic level, a specialist service checks it: including free mailboxes, domains that accept everything, spam traps and throwaway addressesCredits, for each address the service answers

The screen only lets you choose the levels your installation has set up. The others are greyed out, with the reason: Not configured in this installation (whoever administers your installation sets it up) or, for querying the mail server, that your company doesn't allow it (it's turned on in Mailing → Settings).

What does "Query the mail server" do?

It does what your email account would do when sending a message, but stops before sending it: it introduces itself to the recipient's mail server, tells it who the message would go to and records the answer. If it answers that the mailbox doesn't exist, the address becomes invalid with The mailbox does not exist. The recipient receives nothing.

What you should know:

If several mail servers block your installation's queries at the same time, the installation stops asking for a few hours to protect itself, and the level is greyed out with Turned off in this installation. Verifications that were already using it wait for it to come back.

What does the "ERP verification service" do?

It sends the addresses to a service that specialises in checking email addresses, which answers for each one. It's the most reliable level:

The basic level runs before anything is sent, and only what the basic level hasn't settled goes to the service: an address that's written wrongly, from a domain that doesn't exist, a noreply@ or a throwaway one is already known, and you don't pay for it.

How much does the verification service cost?

It's paid for with credits, the same ones the AI assistant uses. The price per address is shown on the screen next to the level (for example, 0,5 credits per address), and you're only charged for the addresses the service answers: the ones the basic level rules out, the ones the service couldn't check (unknown) and the ones that never get sent cost nothing.

When you click Count you see:

It's an "at most" because the basic level may still rule out a few more when checking their domain. If your balance isn't enough for that cost, the verification isn't launched and the screen says how many credits you're short: buy credits or narrow the list with the filters.

While it's verifying, you're charged gradually, in batches, for what the service answers. The verification's details show Charged: … of … expected at most. If the balance runs out halfway, the verification takes the addresses the balance still covers and then pauses with the reason Out of credits: you’re … short: when you have balance, open it and click Resume. What's already been verified is kept.

Where do the addresses go with the verification service?

To a third party that checks them on your company's behalf: it's a data processor for that data, like any provider that processes personal data on behalf of someone else. By default it processes them in the European Union (Germany); the screen shows it next to the level. It only receives the addresses the basic level hasn't settled, and no other data about your contacts.

How do I verify my addresses?

  1. Click New verification.
  2. In How far it checks, choose the level.
  3. In Which addresses, filter the list as in the address register: by text, status, legal basis, quality, the result of their last verification or those that have gone a number of days not verified. With no filter, they're all included.
  4. Leave Skip those verified in the last days ticked if you don't want to repeat the ones checked recently. It suggests the number of days a verification is valid in your company.
  5. Click Count: you'll see how many will be verified, how many are skipped because they were verified recently and how many aren't verified because they're unsubscribed or have complained. With the verification service, also how many will go to the service, what it'll cost at most and your credit balance.
  6. Click Launch the verification.

The verification runs on its own, in batches, while you carry on working: you don't need to keep the screen open. If you leave it open, the progress updates by itself.

Addresses that are unsubscribed or that complained aren't verified: nobody is going to write to them, so nothing is spent on them. And of those verified recently, only the ones checked at that level or a more complete one are skipped: a basic verification from yesterday doesn't save you querying the mail server.

If there are lots of addresses (more than 2.000), you have to type how many there are to launch it. A verification takes up to 50.000; for more, split it up with the filters.

What do I see while it's verifying and when it finishes?

Clicking a verification in the list opens its details:

While it's running you can click Pause (with a reason, if you like), Resume to let it carry on, or Cancel. A cancelled verification can't be resumed: what's already been verified is kept, and the rest stays unverified.

A verification's address-by-address details are kept for 24 months after it finishes: after that its figures and the latest result for each address remain, but it can no longer be cleaned up nor can its clean-up be undone.

What can a verification say about an address?

One of four results, always with its reason:

ResultWhat it means
ValidThe mailbox exists, or nothing suggests otherwise at the level reached
InvalidIt can't receive email, and there's proof of it: it's written wrongly, its domain doesn't exist or doesn't receive email, or its server says that mailbox doesn't exist
RiskyWriting to it is risky or pointless: the domain accepts any address, it's a throwaway address, it's a mailbox nobody reads (noreply@, postmaster@…) or one that's full, or the verification service knows it's a spam trap, that it marks emails as spam or that it's on its "do not send" list
UnknownIt couldn't be determined: the server doesn't answer, gave a temporary error or doesn't allow queries

An address is only marked invalid with proof. Any doubt —a server that doesn't answer, one that doesn't allow queries— leaves it unknown, never invalid: an invalid address doesn't receive invoices or other documents either.

What does each reason mean?

ReasonResultWhat's happening
Does not look like an email addressInvalidIt's written wrongly: two dots in a row, a comma, an invisible space picked up when copying, a domain with no ending…
The domain does not existInvalidNobody has registered that domain
The domain does not accept emailInvalidThe domain exists but has no mail server, or declares that it doesn't receive email
The mailbox does not existInvalidThe recipient's mail server says that mailbox isn't there
Disposable address (throwaway)RiskyIt's from a temporary address service: nobody reads it after a while
It is a mailbox nobody reads (noreply, postmaster…)RiskyIt's a mailbox for automated sending or for email administration
The mailbox is full and does not accept emailRiskyThe mailbox exists, but won't take any more email: it's usually an abandoned mailbox, although it can be emptied
The domain accepts any address: there is no way to know whether the mailbox existsRiskyIts server says yes to everything, even to a made-up address
Spam trap, Known for marking emails as spam, On the verification service’s ‘do not send’ listRiskyThe verification service knows: writing to it harms your account
The mail server does not respondUnknownNeither the domain nor its server answered. It tries again by itself twice, after 10 and 30 minutes
Temporary mail server errorUnknownThe server asked to come back later. It's also retried
The mail server does not allow queriesUnknownIt rejects whoever asks, not the mailbox
The mail server has not been queriedValidIt's a free mailbox, your company or your installation doesn't allow it, or there was no slot: the result is the basic level's, and the Details say why
Nothing to reportValidEverything in order at the level reached

The verification also warns you if the address looks misspelt (ana@gmial.com → ana@gmail.com): that's the Suggestion. And it flags role addresses, such as info@ or ventas@. A role address isn't suspicious: in many companies it's the address they've always used.

What do I do with a typo suggestion?

Correct it at its source: on the customer record or the CRM contact where it was mistyped. The address register doesn't change an address —the address is the register's key— and the verification doesn't know which record each one comes from: the suggestion tells you which is the right one, and the correction is made on the record.

How do I verify a single address?

  1. Open the address in Mailing → Addresses.
  2. In Verification, click Verify now.

It's verified there and then with the basic level and the result appears on the record. If your company and your installation allow it, there's also a button to query the mail server and another for the ERP verification service. The latter costs credits: when you click it, the screen says how much it costs to verify that address and asks you to confirm; if your balance isn't enough, it says so and doesn't go ahead. You're only charged if the service answers.

If the requested level can't be reached at that moment —the installation has already asked everything allowed for that hour, or the service asks to wait— it doesn't wait: it shows what the basic level says and the notice explains it. That result is recorded on the address, unless it already had one from a more complete level: then it shows it, says it hasn't been saved, and the address keeps what was already known. If the basic level finds something certain (the domain no longer exists, for example), that is always recorded.

On the record you can see the address's latest verification —result, reason, when and at what level, the suggestion if there is one and whether it's a role address— and the list of verifications it's been in, from the record or in a verification of a list.

Does verifying an address change anything?

No. Verifying only records the result on the address, with the date and the level reached. The address doesn't change status or quality, and it keeps receiving your sends just as before.

To stop writing to the ones the verification finds invalid or risky, clean them up: it's a separate action, with the count shown first. If an address has a typo, correct it at its source.

A verification is valid for a while: after the days set in your settings (90, by default), the address goes back to counting as not verified. In the address list, its badge is shown faded.

How do I clean up addresses with a verification's result?

  1. Open a Finished verification in Mailing → Verification.
  2. Scroll down to the Clear block: it has a box for each type of address, each with how many there are in the verification.
  3. Tick or untick the boxes. The figures below change by themselves: how many Will be marked invalid, how many Will be marked ‘Do not resend’ and how many are Left untouched, with the reason.
  4. Click Clear.

When it's done, the verification says Cleaned up … and who did it, and how many addresses ended up each way. The Clean-up column in the table says what was done to each one. A verification is cleaned up once: clicking again doesn't change anything; to clean it up differently, undo it first. A cancelled verification can't be cleaned up.

What does each clean-up box do?

BoxWhat's done to themBy default
InvalidThey become invalid: they don't receive sends or documents by emailTicked
Spam trapsThey're set to Do not resendTicked
Known complainersThey're set to Do not resendTicked
On the ‘do not send’ listThey're set to Do not resendTicked
Mailboxes nobody readsThey're set to Do not resendTicked
Catch-all domainsThey're set to Do not resendUnticked
DisposableThey're set to Do not resendUnticked
Full mailboxesThey're set to Do not resendUnticked

The Do not resend reason left on the record starts with Verification: and says which it was (for example, Verification: Spam trap). Valid and unknown addresses are never touched.

Clean-up doesn't touch:

Why does it ask me to confirm that they should be cleaned up anyway?

Because some of the addresses that are going to change have received invoices or other documents by email in the last 12 months. An invalid address or one set to Do not resend doesn't receive the documents you send with sending documents by email either, so it's worth checking them first: perhaps the address is fine and is just risky.

The warning says how many there are. To clean them up anyway, tick Understood: clean them up anyway and click Clear. You can also untick the box that includes them.

How do I clean up a single address?

  1. Open the address in Mailing → Addresses.
  2. In Verification, click Clean up this address.

It appears when its latest verification finds it invalid or risky and there's still something to do. It does the same as the clean-up of a verification, without boxes: an invalid address becomes invalid and a risky one is set to Do not resend. It also works for an address that its verification's clean-up left as it was because its box wasn't ticked.

On the record, the address's list of verifications shows in Clean-up what each clean-up did to it, when and who did it.

How is a clean-up undone?

For a whole verification:

  1. Open the cleaned-up verification in Mailing → Verification.
  2. In the Clear block, click Undo the clean-up….
  3. Check the count: how many will be reactivated, how many will be allowed resending and how many are left as they are and why.
  4. Click Yes, undo it.

The ones the clean-up made invalid become active again, with the reactivation quality and the reason Clean-up of verification no. … undone. The ones it set to Do not resend have it removed. The verification goes back to not being cleaned up: it can be cleaned up again, with different boxes if you like, and it says when and who undid it.

Undoing only reverses what the clean-up did and nobody has changed since. These are left as they are:

For a single address, from its record in Mailing → Addresses: an invalid one is restored with Reactivate, saying why, and one set to Do not resend, with Allow resending. See the quality of an address.

On the record, the address's list of verifications also shows whether its clean-up was undone, when and who did it.

What do I need to verify and clean up?

Permission on Mailing → Verification: to see verifications, view access is enough; to launch one —including Verify now on an address's record— you need create access; and to pause, resume or cancel, edit access.

Cleaning up changes addresses: as well as edit access in Mailing → Verification, you need edit access in Mailing → Addresses. The same goes for Clean up this address on the record and for Undo the clean-up.

What can be configured for verification?

In Mailing → Settings, in its Address verification section:

OptionDefaultWhat it decides
Allow querying the mail serverNoWhether a verification can query each recipient's server. It must also be allowed in the installation
Clean up when finishedNoWhether, when a verification finishes, it's cleaned up automatically with the default boxes. It doesn't ask for confirmation for the ones that receive documents, and it doesn't apply to Verify now on a record
Days a verification is valid90After this time, the address goes back to counting as not verified. It's also what Skip those verified in the last suggests
Months verification detail is kept24When each verification's address-by-address details are deleted. The latest result for each address is kept

Everything else about addresses is in the address register and in the quality of an address.

If something goes wrong

What you seeWhat has happenedWhat to do
A level is greyed out with Not configured in this installationYour installation doesn't have that levelAsk whoever administers your installation
New verification doesn't appearYou don't have create permission in Mailing → VerificationAsk whoever manages permissions
"No addresses to verify with this filter"The filter leaves none, or they're all unsubscribed or were verified recentlyChange the filter or untick Skip those verified in the last
Lots of addresses in Pending that don't moveTheir domain didn't answer and they're waiting for their next attemptNothing: they're retried automatically. The verification's notice says when
The notice Waiting for a mail server probing slotThe installation has already asked as much as is allowed for nowNothing: it carries on by itself when there's a slot
Query the mail server is greyed out with Turned off in this installationSeveral mail servers have blocked your installation's queries and it has stopped for a while to protect itWait the hours it says, or let whoever administers your installation know
Lots of unknown addresses with The mail server does not allow queriesThose servers don't let your installation askCheck them with the ERP verification service, or let whoever administers your installation know if there are lots
The verification is Paused and you didn't pause itSomething is stopping it from carrying on; the reason is shown on the screenSort it out and click Resume
Paused: Out of credits: you’re … shortYour credit balance ran out halfway through a verification with the serviceBuy credits and click Resume. What's already been verified is kept
Launch the verification is greyed out and says your credit balance isn't enoughThe most it could cost is more than you have leftBuy credits, or narrow the list with the filters so it costs less
Paused because the installation's verification service has no balance or rejects its keyThe account the installation has with the service can't be usedLet whoever administers your installation know; once it's fixed, click Resume
The notice Waiting for the ERP verification serviceThe service asks to wait a little or isn't answering right nowNothing: it carries on by itself in a few minutes, without charging for what's waiting
The notice Couldn’t charge for what the verification service answeredA failure when recording the creditsNothing: it's retried automatically, without asking the service again; until then no more are verified
Verify now says "Not saved"The requested level couldn't be reached and the address already had a more complete resultNothing: it keeps what was already known. Try later if you want a new one
The Clear block has no boxes and asks for the Addresses permissionCleaning up changes addresses and you can't edit themAsk whoever manages permissions
Clear is greyed outThere are addresses that receive documents and it still needs confirmingCheck them, and tick Understood: clean them up anyway
A finished verification says "It couldn’t clean itself up on finishing"The automatic clean-up failedClean it up manually with the Clear block
An invalid address didn't change when cleaning upIt's unsubscribed or complained, it was already invalid, or it was verified laterLook at its row in the table (Clean-up column); if needed, Clean up this address on its record
When undoing a clean-up, some address is still invalid or set to Do not resendSomething changed after the clean-up: it bounced, someone reactivated it, it unsubscribed or its reason was changedThe Clean-up column says so; if needed, Reactivate or Allow resending on its record
Undo the clean-up doesn't appearThe verification hasn't been cleaned up, or you're missing edit permission in AddressesAsk whoever manages permissions

More about Mailing