How do I convert a contact into a customer?
A CRM contact is a person you are following up; an ERP customer is someone you invoice. They are two separate records. Converting creates the customer record from the contact’s details, links the two and, from then on, keeps what they share up to date.
What do I need before I start?
Nothing is required. Whatever you have filled in goes to the customer record, and whatever you complete later does too: there is no rush to have everything in place before converting.
Even so, it is worth having the Tax ID and the legal name: they are the ones that appear on the invoice.
Which details does the contact take to the customer record?
Converting copies everything the two records share, if it is filled in:
- The trade name, which is the customer’s display name. If the contact doesn’t have one, its Company is used, and if that is missing too, its full name.
- The legal name, which is the registered name that appears on quotes and invoices.
- The Tax ID.
- The Phones and Emails (see below how they are shared out).
- The Website, the Sector and the Remarks.
- The first Address on the record: street, town or city, postcode and country.
- If the contact is a company, its People are added as the customer’s contact persons, with their job title, their email address and their phone.
What isn’t shared between the two records?
Three things, and it is worth knowing them so you don’t look for them where they aren’t.
The province doesn’t go across. The CRM address has no province box, so it is filled in on the customer record and stays only there.
Nor does the contact’s priority. It belongs to the CRM and the customer record has nowhere to store it.
And the customer’s sales terms —price list, payment method, ledger account, discounts— only exist in the ERP. The CRM never touches them, not even when converting: they are set on the customer record and no change to the contact deletes them.
How do I do it?
- Open the contact’s record.
- In the header, click Convert to customer.
- Wait for the message. If all goes well, the button is replaced by View customer record.
That button takes you to the customer’s record in the ERP.
How do I get from here to the customer record, and how do I get back?
Once converted, the contact’s header shows View customer record. It takes you to its record in the ERP: its sales terms, its documents and its receipts.
You don’t lose track of where you came from. At the top of the customer record you see ← Back to the contact record, and clicking it takes you back to this same contact.
The reverse route exists too: from a customer’s record, the View in the CRM command takes you to its contacts, and you get back the same way from there.
What happens when I do it?
Three things happen in a row:
- The customer is created in the ERP with the code CRM- followed by the contact’s internal number (for example
CRM-42). - The contact is linked to that customer and its Status changes to Active customer.
- It is recorded in the record’s History as ‘Converted to customer’.
A contact can only be converted once. From then on the button no longer appears.
From that moment the contact is included in the churn Risk calculation, which looks at the customer’s sales. Before converting, a contact never has any risk.
Are the two records kept up to date after converting?
Yes. Once linked, correcting a shared detail in either of them also corrects it in the other. You don’t have to repeat it or remember anything.
From the contact to the customer go the trade name, the legal name, the Tax ID, the phones, the email addresses, the Website, the Sector and the Remarks. Changing any of them on the contact’s record changes it on the customer’s at that very moment.
From the customer to the contact go the trade name, the legal name, the Tax ID, the Web and the Remarks, when you click Save on the customer record.
Only what you have changed is touched. The rest of the target record stays exactly as it was.
In that direction —from the customer to the contact— emptying a box doesn’t empty the contact’s detail. The customer record shows fewer boxes than the contact has, and an ordinary save would arrive with several blank without anyone having touched them; if blank meant delete, it would wipe out details that can’t even be seen from there. To remove a detail from the contact, remove it on the contact.
How are phones and email addresses shared out?
The two records don’t store them the same way, and it shows. The contact has a list with no limit, with each one’s type and one marked as main; the customer has two phone boxes, one mobile box and two email boxes.
From the contact to the customer they are shared out in order, and the main one always goes first. Those that aren’t mobiles fill Phone 1 and Phone 2; the first mobile goes to Mobile; email addresses fill Email 1 and Email 2. If the contact only has mobiles, the first one acts as the phone so the customer record isn’t left without any.
Whatever doesn’t fit in those boxes stays on the contact, which is where they all are.
From the customer to the contact they don’t go across. This is deliberate: the customer stores fewer numbers than the contact can have, and copying them over would delete the ones the ERP can’t store. Phones and email addresses are managed from the contact’s record.
What happens if the other record fails to update?
What you were editing is saved anyway. The two records are saved separately, so a problem reflecting the change in the other one doesn’t make you lose what you have just typed or lock the screen.
What can happen is that the two records say different things for a while. You fix it by saving the detail again: each save tries again.
Can it be undone?
Not from the screen. Once linked, the contact’s record shows View customer record and there is no button to unlink.
Nor can you delete the contact while the link exists. If you need to reverse it, ask support.
What happens if the process stops halfway?
The two steps —creating the customer and linking it— don’t go together. If the second fails, you are left with a customer created but not linked and the contact stays as a prospect.
You can spot it straight away: in Customers there is one with a CRM-… code and the contact still shows the Convert to customer button. Don’t click it again, because it would create a second customer with the same code and fail: tell support so they can fix the link.
What if the customer already existed in the ERP?
Converting always creates a new customer. It doesn’t look for or reuse an existing one by Tax ID or by name.
If the company was already a customer, don’t convert: there is no way from the screen to link a contact to a customer that already exists. What you can do is associate that customer with the deal’s card, with the Customer option of the card’s Add button.
Where do I see what they have bought from me?
On the contact’s record, Summary tab, there is an Invoicing panel with what that contact has really been invoiced. It doesn’t come from the CRM: it is read from the ERP.
It shows the total for the last 12 months, how many documents there are and the month-by-month breakdown with one bar per month. The total also appears to the right of the panel title.
The panel can tell you four different things, and it is worth not mixing them up:
- ‘Not a customer yet — no invoicing.’: the contact isn’t linked to any ERP customer yet. It is a prospect. If you know they have bought from you, what is missing is the link, not the data: convert it into a customer or link it to the one that already exists.
- ‘Customer with no invoicing in the last 12 months.’: it is linked, but hasn’t bought from you in that period. This is different from the previous one: here there was a relationship and it has cooled.
- ‘Figures not available right now.’: the ERP couldn’t be queried. Come back later; the rest of the record works the same.
- Its figures, when there is invoicing to show.
If something goes wrong
| What you see | What has happened | What to do |
|---|---|---|
| ‘The contact is already linked to a customer.’ | It was already converted | Use View customer record to open its record |
| ‘The customer couldn’t be created: …’ | Creating it in the ERP failed; the message says why | Correct what it says and click again. Nothing has been created |
| ‘A customer with the identification code ‘CRM-…’ already exists.’ | An earlier attempt did create the customer | Don’t repeat it: it has to be linked by hand. Tell support |
| The button still says Convert to customer after a success message | The link wasn’t saved | Check whether the customer CRM-… exists before trying again |
See also: Add a contact · Add a customer (the ERP record) · View the sales forecast
More about CRM
- How do I ask the assistant to show me a screen?
- How do I make the board work on its own?
- How do I create a board to run the pipeline?
- How do I add a contact?
- How do I add a deal?
- Why is my home screen the CRM dashboard?
- Why did the CRM ask me what I work on?
- How do I see only my own work or my department's?
- How do I store a contact's documents?
- How do I make a quote from the CRM?
- Follow up your customers with the CRM
- How does the program help me log my first activity?