Skip to content

How do I ask the assistant to show me a screen?

The assistant doesn’t just tell you how something is done: it tells you which screen it is on, takes you to it and, if you ask, shows it to you step by step on the screen itself, with each step pointed out. It works for any screen in the program you have access to.

Where is the screen for…?

Ask it in your own words: ‘where is the test data?’, ‘I can’t find where items are added’, ‘which screen are direct debit batches done on?’.

It answers with the way through the menu —for example, Treasury → Direct debit batches— and offers to open it. It only offers to open screens you can open. If the one you are looking for exists but your profile or your company’s plan doesn’t include it (or it belongs to a module that isn’t switched on), it tells you where it is and to ask whoever runs the program in your company for it; it doesn’t tell you it doesn’t exist.

It looks for it by its name, by the words people usually call it and by the questions on its manual page. That is why ‘where do I mark a favourite?’ takes you to My settings → Menu, even though the screen isn’t called that. It doesn’t matter how you phrase it: ‘create a customer’, ‘add customers’ or ‘customers’ take you to the same place.

It also knows some places inside a screen. If what you are looking for is a tab, it takes you to it: ‘where do I design the company menu?’ opens My settings → Menu → Design menu. And what is in Settings (the cog at the top) it opens by its section: ‘I want the dark theme’ opens Settings → Appearance on top of the screen you are on, without moving you from it.

If it doesn’t find it but one looks similar, it asks whether you mean that one before taking anything as right. The same when the only clue is a question on its manual page: it tells you where it is and doesn’t open it until you say yes. If none looks similar, it tells you so and asks you for another word. It is almost always because the function is called something else: try with what you want to do (‘collect a bank bill’) instead of the name you would give it.

How do I get it to take me there?

Say yes when it offers to open it, or ask it directly: ‘take me to bank reconciliation’, ‘open the receipts screen for me’. The screen opens in place, without closing the assistant.

When you ask how something is done or where it is (‘how do I get the stock report?’, ‘tell me where favourites are set’), the answer comes with two buttons underneath for the screen it is talking about: Open … takes you to it and Show me the screen takes you there and starts its tour. You don’t need to ask for them: if the screen exists and you can open it, the buttons are there.

You don’t need to ask in a particular way. ‘Hey, the stock thing, where do I get it?’ works just like ‘how do I get the stock report?’: when it doesn’t recognise the way you ask, the assistant checks before answering, and with use it learns to recognise it straight away.

It never takes you to another screen if you have unsaved changes in front of you: it warns you to save or cancel first, and you ask again when you are ready.

How do I ask it to show me how to do something?

Ask it as you would ask a colleague: ‘how do I create an item?’, ‘show me how to add an item’, ‘I want to learn how to make an order’. If that operation has a script, the assistant offers to show it on your screen: it opens it and does it in front of you, step by step, with example values and without saving anything (it cancels at the end). Say yes, or ask it directly (‘yes, show me’), and it starts. The only exception is a practice company, where it can go right to the end and does save; it is explained further down, and the guide tells you before starting.

Not all operations have a script yet. When there isn’t one, it explains it with the manual, and each question of that kind is noted so that the scripts still missing are the ones people ask for.

How do I get it to show me a whole screen?

Ask it like this: ‘show me the customers screen’, ‘can you explain the journal screen to me?’. It opens the screen and starts its tour: one card per step, each one pointing out on the screen the button or area it is talking about. You move forward with Next and leave it whenever you like.

While it lasts, the screen can’t be clicked, not even what the card points to: it is only explaining it to you, and that way the tour doesn’t get thrown off by a stray click. The exception is a step that asks you to click something (‘Click Create board’): that button can be clicked. To leave it, Exit or the Escape key. And if a step has a screenshot, click the image to see it large; it closes with another click or with Escape, and the tour carries on where it was.

There are three kinds of tour, and you don’t need to know which one you will get:

On those screens, F1 first asks what you want to learn to do: one option per operation (‘Create an item’) and Show me the screen, which is the tour of the whole screen. When an operation finishes it asks whether you want to see something else; No, thanks leaves you on the screen. Not every operation on a screen has a script: the missing ones are covered in the screen’s tour or the assistant explains them with the manual.

When the screen has many operations, the question comes in sections: in the Journal you first choose Journal entries, Balancing and VAT or Receipts from the journal, and inside that the operations in that section. ‹ Back takes you back up to the list of sections. On screens with few operations there are no sections and you see them all at once.

If you choose an operation that starts in the list and you are inside a record, the option tells you before you click it (‘we’ll leave this screen’) and the guide takes you to the list by itself. If you have unsaved changes, it doesn’t move you: it warns you and you decide.

The card’s footer is like a video’s: ⏮ previous step, ⏸ pause / ▶ continue and ⏭ do it now (it doesn’t wait for you to finish reading). ⏮ leaves the screen as it was at that step: if the guide had opened a record afterwards (the new item form), it closes it without saving, so that the step can be done again. Whatever was already open before starting isn’t touched. With Your turn you take over: the screen is yours, you click and type, and the guide points out what comes next and moves on when it sees it done. The card tells you at each step what you have to do (‘click New item’, ‘type in Code, for example TAZA-01’); ⏭ becomes do this step for me, in case you don’t fancy one, and ▶ hands control back to the guide.

There are steps that it asks you to do even while the guide is driving: the card says Your turn, points out what has to be clicked and doesn’t move on until you click it. And there are steps that don’t let you continue until you have typed something in the field they point to, or until what you were asked to create exists on screen; there the move-on button is greyed out until you do it. They are the steps where watching isn’t enough: you have to do it to understand it.

The buttons that would really save (Save, Issue, Delete…) stay covered even when you are driving: you can see them, they are explained, and the cursor tells you no; and Enter in a field doesn’t submit the form while the guide lasts, for the same reason. Exit or the Escape key close the guide at any time; whatever the guide had open (a half-done record) stays as it was, and you close it yourself.

Some are offered from another screen, because that is where they are needed. That is the case of bringing in data from Excel or a CSV: it appears in the F1 of Customers, Suppliers and Items (which is where you remember you have them in a spreadsheet), and when you choose it the guide takes you by itself to the Data import screen and explains all of it to you.

The cards have images: the first, the whole screen as it looks with data; the operation one, a cut-out of what is behind the button (the record that opens when you click New customer). That way you see what is coming without having to click it. The image is shown at the size it has on the screen, neither shrunk nor enlarged, as far as it fits in your window: the card becomes as wide as needed. If the window is small and it doesn’t fit whole, it enlarges when you click it; a click anywhere closes it and you go back to the tour where you were.

The images come from a sample company, not from your data: the names and figures you see in them aren’t yours. And not every card has an image: when screenshots haven’t yet been taken of that screen, the card comes with just the text.

Why does the guide stop just before saving?

Because you are in your working company and what the guide types can’t stay. An operation that saves —issuing an invoice, creating a customer— is shown to you up to the button, and there the card tells you what would happen if you clicked it: what number it would get, what would be created automatically. Then it cancels whatever it opened and your screen is left as it was.

If you work in a practice company, the guide goes right to the end. A practice company is one whose financial year is marked as a test one: what is saved there doesn’t matter to anyone. In it the assistant also offers you the full version of the operation (‘Issue an invoice for real, to see it happen’), and that one does click Save and Issue: you see the provisional number change to the final one, the instalment appear in open items and the journal entry get generated. What you do there is saved, and the first step tells you so before starting.

The guide never changes your company to show you this. It looks at where you are: if you are already in a practice company, it goes to the end; if not, it stops at the button. Changing company is up to you, in the usual company selector.

Is there a quicker way than typing it?

Yes, two, and they are the same gesture on every screen:

Both open the tour of the screen you are on (or, if the screen has operations to show by doing them, the question of which one you want to see). And in the assistant panel, until you have typed anything, the first suggestion is always Show me the screen …: clicking it starts it straight away.

The panel’s other suggestions also change with the screen: they are the questions on its manual page, so that the most likely question is one click away.

If something goes wrong

What you seeWhat has happenedWhat to do
‘There’s no screen with that name’It is called something else, or it is done inside another screenTry with what you want to do (‘collect a receipt’) or ask it how it is done
‘It exists, but your plan or your profile doesn’t include it’The screen is in the program, but not in what you have contracted or are allowed, or its module isn’t switched onAsk whoever runs the program in your company for access
‘I won’t take you to …: you have unsaved changes’You are editing somethingSave or cancel, and ask again
The tour doesn’t point to anything in a stepThat step explains the screen in general, or talks about something on another screen, or the list is empty and there is no record to openCarry on with Next: the text still applies, and if the step has an image, you can see there what it describes
A card has no imageThat step has no screenshot: it talks about something you have to find first, or a screen that opens laterCarry on with Next
The tour that does it in front of you disappears and the notice ‘Keep trying and press F1 when you’re stuck’ appearsThe screen has changed underneath (you have closed the record, a notice, another tab) and the guide can no longer find what it had to show youNothing: the screen is yours. When you want to see it again, F1
With Your turn you close the record before the guide asks for itYou have done the last step yourself: the guide takes it as doneClick Finish
A hand-written tour says ‘Lost track’You have navigated or reloaded halfway, and it can’t find what it was pointing toRetry, or Exit and carry on by yourself
With Your turn, a button won’t let you click it and the cursor says noIt is a button that would really save (Save, Issue, Delete…): the guide covers them even when you are drivingFollow the script; when you do it for real, without the guide, that button works as usual
The move-on button is greyed out and the card doesn’t move to the next stepIt is a step that is your turn: you still need to type in the field it points to, or create what it asks forDo what the card says; the button lights up on its own when it sees it done
You don’t get the ‘for real’ operation that your colleague does haveThat version is only offered in a practice company, and yours isn’t oneNone: in your company the same operation is shown up to the button and stops there
F1 does nothing on this screenIt is a technical screen with no entry in the menuAsk the assistant whatever you need

See also: Ask the assistant something · I can’t find an option in the menu · Setup

More about Assistant