How do I make the board work on its own?
An automation is a board rule of the form ‘when X happens, do Y’. It means that moving a card can change the contact’s stage, mark the deal as won or alert the right person, without anyone having to remember to do it.
What do I need before I start?
The columns and tags you are going to use in the rule, already created: the selectors only offer the ones that exist.
How do I do it?
- Open the board and, in the header menu, go to Automations. It opens on Created, with the rules the board already has.
You can also get there without opening the board: in the CRM dashboard, the menu on each board’s card has Automations and opens the same window.
- Go to Create automation.
- In 1 · What has to happen, choose the trigger. The buttons at the top (Cards, Labels, Checklists…) are families, and each one says how many triggers it has: you always see one family, not the whole list.
- If you choose Card moved to column, just below it asks Which column does it reach?, with the board’s columns in a row. If there are many, the row scrolls inside its box.
- Click Next. Until the trigger is complete, the button is greyed out.
- In 2 · What the program will do, choose the action the same way as the trigger, and fill in what it asks for: the target column, the tag, the contact status or the member. Back returns to step 1 without losing anything you chose.
- At the top, the box with IF and THEN writes out the rule as a sentence as you choose: read it before saving.
- Click Create automation.
In Created, each rule is a line that reads like a sentence —‘If a card reaches Negotiation, then move the card to *Won*’— with its status (Active or Paused), the switch to turn it off without deleting it, and the bin.
How do I know if a rule is doing anything?
Below the status, each rule says when it last did something: ‘acted today’, ‘acted 3 days ago’ or, in orange, ‘has never acted’.
These are two different things and it is worth not mixing them up: Active means it is switched on; the trail says whether it has actually changed anything. A rule can be active for months without doing anything —because the cards have no contact, because the tag was already there, because the status was already that one—. If you think a rule isn’t working, look there first.
It only counts when something really changes. If the rule fires and finds the work already done, it doesn’t add up.
How do I change a rule that already exists?
Click directly on the part of the sentence you want to change: it is highlighted when you hover over it. The ‘If’ half opens step 1, the ‘then’ half opens step 2, and in both cases the whole rule comes with it —both sides already appear in the box at the top—, so you can move with Next and Back and change whatever you want.
Clicking Save changes modifies that same rule: it keeps its place in the list, and if it was Paused it stays paused. If you change your mind, go back to Created and it stays as it was.
What can trigger a rule?
| Trigger | When it fires |
|---|---|
| Card moved to column | When you move a card to the column you choose |
| Card created | When you create a card on the board |
| Card completed | When you tick a card’s completed box |
| Checklist completed | When you tick the last item of a checklist |
| Tag added | When you put a tag on a card |
| Tag removed | When you remove it |
| Owner changes | When the card becomes someone else’s |
| Value exceeds an amount | When the value crosses the amount you set, going up |
| Due in a few days | The days left until the due date |
| Card past its date | When the date has passed and it still isn’t completed |
| Stuck in the same column | When it has gone the days you say without moving |
| Contact changes status | When the status of the linked contact changes |
| Contact changes priority | When its priority changes |
The ones marked (optional) in their settings —tag, person, status, priority— fire with any value if you choose nothing. The ones that ask for a number —amount, days— don’t fire without it.
What can a rule do?
| Action | What it does |
|---|---|
| Move to column | Moves the card to the column you choose, at the end |
| Set due date | Sets the due date to today, tomorrow or the days you choose |
| Set reminder | Schedules the bell alert before the due date |
| Set owner | Says whose card it is |
| Assign member | Adds that person as a follower of the card |
| Add tag / Remove tag | Adds or removes the tag you choose |
| Mark as completed | Ticks the card’s box |
| Change contact status | Changes the Status of the contact linked to the card |
| Change contact priority | Sets the priority to High, Medium or Low |
| Add note to contact | Leaves the note with the text you write in the rule |
| Write to contact | Sends them an email with the subject and text you write, or with a mailing template. Just once, not every day |
| Disqualify contact | Moves it to Disqualified with the reason you choose |
| Create follow-up for contact | Schedules a task in the CRM calendar the days you say |
| Alert in the bell | Posts an alert with your text, linked to the card |
| Mark deal won / lost | Records the sales outcome |
| Assign by best match | Assigns the card to the salesperson with the best track record in the contact’s sector and the lightest workload |
Which actions work with each trigger?
All of them with all of them. Any of the nine actions can be combined with any of the five triggers and runs the same way.
What does depend on the case is that the action has something to act on: all the contact actions (change status, change priority, add note, write an email, disqualify, create follow-up) need the card to have a Contact assigned, and Assign by best match needs members on the board. Without that, the rule fires and does nothing. Write to contact also needs that contact to have an email address; if they only have a phone, it does nothing either.
How does writing to the contact work?
It is the only action that goes outside the program: an email reaches a person. That is why it is worth knowing three things before using it.
It is sent only once, not every day. The typical case is ‘if it has been stuck in Not contacted for 5 days, write to them’, and that trigger is still true tomorrow and the day after. The email goes out once per card: as long as the card doesn’t move, it isn’t repeated.
If the card changes column, the rule is re-armed. If it later gets stuck again, it will write again. This is what keeps the rule useful over time instead of wearing out.
You write the text, subject and body, and it accepts the same placeholders as the rest ({contacto}, {tarjeta}). Changing it means editing the rule: you don’t need to tell anyone or wait for a new version.
The email goes out through the program’s outgoing queue, like all the others. If the mail server is down at that moment, the card moves anyway and the email goes out when it recovers: a mail problem never leaves the board half done.
Can I write to the contact with a mailing template?
Yes, if your company uses Mailing. In Write to contact, tick Send it with a mailing template and the company’s sender and choose:
- With which template?: a sales mailing template, with its design and its variables (the contact’s name, their company’s name…).
- From which sender?: one of the accounts in Mailing → Senders, or the one set in the mailing settings.
- A different subject?: if you leave it empty, it uses the template’s. It accepts the ⊕ contact and ⊕ card placeholders.
This way the email goes out through your company’s account, like a mailing send: with the unsubscribe link, with open and click tracking, and respecting what the mailing knows about that address. It doesn’t reach anyone who has unsubscribed, marked an email as spam or has an invalid address, nor anyone who is not a customer and hasn’t given consent if your company requires it. Each email appears in Mailing → Newsletters, under Individual emails from other modules, with the source CRM rule, and stays in the contact’s history.
It is still sent only once per card, like the email with your own text. To choose this option you need the Mailing: launch sends permission; without it, you can see it in the rules that already use it, but you can’t change it.
What does the follow-up for the contact do?
It creates an all-day task in the CRM calendar, with the title you write in the rule and on the day you choose counting from when it fires. It uses your activity type in the Task category; if you don’t have one, it creates one called ‘Task’. The owner is the card’s; if the card doesn’t have one, the contact’s.
Can I make the text say each person’s name?
Yes. In notes, follow-ups, bell alerts and emails, below the text box you have two pills: ⊕ contact and ⊕ card. You don’t have to type anything strange — you just click them. In the email they work both in the subject and in the text.
Type Call, click ⊕ contact, keep typing about and click ⊕ card. The box ends up like this:
Call {contacto} about {tarjeta}
and just below, in grey, you see how it will really look:
It will look like this: Call Ana Ruiz about ACME proposal
The box doesn’t lose the cursor when you click a pill, so you can keep typing without clicking inside again. The placeholder is always added at the end of what you have written.
| Pill | What comes out |
|---|---|
| contact | The name of that card’s contact |
| card | The card’s title |
Where it shows most is in the bell alert, which is read without opening anything.
If the placeholder can’t be filled in —{contacto} on a card with no contact— it is removed, not left written with the braces.
Disqualifying is final. The contact moves to Disqualified with the reason you choose. If it was already disqualified it isn’t touched, and the original reason is kept.
Are date triggers immediate?
No. Card past its date, Due in a few days and Stuck in the same column aren’t caused by anyone doing something: they become true on their own as time passes. The program checks them every hour, so up to an hour can pass between the condition becoming true and the rule firing.
Each of these acts only once per card, even if the condition is still true the next day: an overdue card is still overdue tomorrow, and alerting you every day would be noise. When the condition stops being true —you move the card, complete it, change its date— the rule re-arms itself.
Stuck in the same column counts from the last time the card changed column. Cards that have never moved since this version was installed aren’t checked; as soon as you move them once, they are included.
Who gets the bell alert?
Whoever you say. Below the alert text is Who for?:
- The whole company: the usual thing, and what older rules do. The bell broadcasts by company, so everyone who logs in sees the alert. Bear this in mind before putting an alert in a rule that fires many times.
- A department or a group: the alert reaches each of its people, and nobody else.
If the group you chose is left with nobody, or is deleted, nobody is alerted: alerting the whole company for want of knowing who would be the exact opposite of what you asked for.
Clicking it opens the board with the card highlighted. The text is fixed, like that of notes.
Create a task has the same Who for?: with a group, the task belongs to the group (its people see it and any of them can take it) instead of belonging to the card's owner.
Set owner or assign member?
They aren’t the same, and it is the easiest mix-up to make:
- Set owner answers whose card is this?. They are the names shown in Owners on the record, and the ones that count for the Personal filter on the board and in the calendar.
- Assign member only adds that person to Followers, the people who want to know what happens. On the record it shows as a number, not as a name — that is why it sometimes looks as if the rule has done nothing when it has.
You can use both, in different rules.
Set owner lets you tick several people. The card becomes theirs, and stops belonging to whoever had it before: the rule replaces the list, it doesn't add to it. Assign member is still one at a time. Rules you created when only one fitted still do exactly the same; when you open them you will see that person ticked and you can add more if you want.
Or someone from a group. Below the people you can pick a work group: the card goes to the person in the group with the fewest open cards on that board, just like a column shares them out. It is one or the other: ticking the group unticks the people, and the other way round. What stays on the card is that person, not the group. If nobody from the group is on the board, the owner isn't changed.
How does ‘due in a week’ count?
From the day the rule fires, not from the date the card already had. That way a rule ‘on entering Negotiation, due in 7 days’ always gives seven days, even if the card goes in and out of that column several times. If it added to the previous date, each pass would push the due date a little further.
How do I turn the board into the real pipeline?
With two rules per column, on the Card moved to column trigger:
- ‘When it reaches Proposal sent → Change contact status to *Proposal sent*’. That way the contact’s stage and the board column always say the same thing, and there aren’t two truths.
- ‘When it reaches Closed / won → Mark deal won’. That way the sales outcome is recorded when you drop the card, and with it the close date.
The action on the contact only does something if the card has a Contact assigned. If the contact was already in that status, nothing happens.
What happens if two rules call each other?
When you create a move rule that would close a circle —‘A → move to B’ when ‘B → move to A’ already exists, or a longer chain— the system rejects it with the message: ‘Not created: it would cause a loop. From the target column you can already get back to the source column by chaining other automations. Choose another column.’
Deactivated rules are checked too: a switched-off rule is a loop one click away.
That check only covers loops of moves between columns. Other combinations can be created, and if they get tangled the system cuts the chain after five hops and leaves the card where it is. If you see cards moving on their own in strange ways, check the rules.
There are three pairs that call each other and are worth keeping in mind, because the loop warning does not detect them:
| Action | Trigger it causes |
|---|---|
| Set owner | Owner changes |
| Remove tag | Tag removed |
| Change contact status | Contact changes status |
When you choose an action that triggers a rule you already have, the builder tells you in blue before saving: ‘this action will trigger 1 rule you already have’. It is a warning, not a block — chaining rules is often exactly what you want.
Of these pairs, the contact status one is rejected when it closes the circle: ‘on moving to A, set it to B’ plus ‘on moving to B, set it to A’ doesn’t stop on its own, because each hop does change the status. The other two run out by themselves —the second round finds the tag already removed or the owner already set and does nothing—, so you are only warned.
What happens if I delete a column with rules?
The rules that used it, as a trigger or as a target, are deleted too, and the message ‘Automations updated’ appears saying how many have been removed.
If something goes wrong
| What you see | What has happened | What to do |
|---|---|---|
| ‘Not created: you already have an identical automation on this board’ | The same rule was already created | Look for it in the list |
| ‘Not created: it would cause a loop…’ | It would close a circle of moves or statuses | Choose another column or another status, or delete the rule that closes the cycle |
| I can’t find a trigger or an action | It is in another family: the builder shows one at a time | Click the other pills; the number says how many there are in each |
| The contact status doesn’t change | The card has no Contact assigned | Assign one from Add → Contact |
| The email with a mailing template doesn’t reach them | The address is unsubscribed, invalid, has complained or there is no consent; or there is no active sender | Check it in Mailing → Addresses and in Mailing → Senders |
| Assign by best match doesn’t assign anyone | There are no candidates on the board, or the team doesn’t have enough closed deals | With little history it is shared out by workload only; if there are no members, it does nothing |
| A card moves on its own in a loop | There are chained rules feeding each other | Deactivate one of them |
See also: Move a deal through the pipeline · Create a board to run the pipeline · Add a contact
More about CRM
- How do I ask the assistant to show me a screen?
- How do I convert a contact into a customer?
- How do I create a board to run the pipeline?
- How do I add a contact?
- How do I add a deal?
- Why is my home screen the CRM dashboard?
- Why did the CRM ask me what I work on?
- How do I see only my own work or my department's?
- How do I store a contact's documents?
- How do I make a quote from the CRM?
- Follow up your customers with the CRM
- How does the program help me log my first activity?