How do I close and open the financial year?
Closing the financial year creates the year-end journal entries and locks its months. Opening the next one carries the balances forward. Both operations can be undone as long as nobody has carried on working on top of them.
How do I get to the operations?
All the operations on this page live on the same screen: Accounting > Operations. Each one is a card within it.
There is a shorter way. In the Accounting dashboard —the front page of Accounting— the Operations section has one card per operation: Journal entry check, Year-end closing, Financial year opening, Carry-forward of open documents and Period lock. When you click one, Accounting operations opens already positioned on the section you asked for, without you looking for it among the other cards. This is explained in the accounting dashboard.
What do I need before closing?
You need the *financial year*’s accounts reviewed. Closing on top of badly made journal entries leaves the result wrong.
- Go to Accounting and then Operations. Choose the Financial year at the top.
- Click Check financial year. Correct everything that comes up before carrying on. In particular the Imbalance ones: the closing stops if the closing journal entry doesn’t balance. If any General ledger row appears, click Rebuild the general ledger: this is explained in the next question.
- Produce the balance sheet and the profit and loss account and check that they balance. This is explained in produce the balance sheet and profit and loss account.
- Have the value of your stock at year end to hand, if you keep a warehouse.
Closing is a company decision, not a routine task. It is best done once, with the accounts already reviewed.
What does a ‘General ledger’ row in the check mean?
That the general ledger of that account —the monthly totals read by the balance sheet, the trial balance and the annual accounts— doesn’t match the journal lines in the journal. Every journal entry can balance and the balance sheet still come out unbalanced: the journal says one thing and the totals another.
Below the table appears the Rebuild the … general ledger button. It recalculates the financial year’s totals from the journal lines, which are what count. It doesn’t touch any journal entry or any document, and clicking it when the general ledger is already right changes nothing. When it finishes, the check runs again by itself.
The Check the journal entries and the general ledger link that appears next to the Imbalance notice in the annual accounts takes you to the same place.
Normally you won’t have to click it: the program makes this same check by itself every night, when closing the financial year and when calculating the annual accounts, and if it finds anything it corrects it. If it happens when closing, the closing summary says so.
What is ‘Rebuild totals for …’ for?
It is the Customer and supplier totals card on the same screen. It recalculates the Invoiced and Credit notes figures shown on each customer and supplier record (and which travel to the tablets) from the invoices and credit notes issued in the financial year chosen at the top. It doesn’t count drafts, voided invoices or replaced ones. It doesn’t touch the Opening balance, and a record that no longer has documents is left at zero without losing its opening balance.
Normally you won’t have to click it: the program does it by itself on start-up and every night. Click it if a record doesn’t match its invoices and you don’t want to wait for the night. With everything right it changes nothing, and the summary says how many records it has corrected.
How do I adjust stock when closing?
The stock adjustment is optional and is filled in on the closing card itself, in Closing stock to adjust (optional). If you leave it empty, the closing creates no stock journal entry.
For each warehouse you want to adjust, click + Add account and fill in the row:
- Stock account (3x): the account holding the warehouse’s value.
- Change in stock account (61x/71x): the matching change in stock account.
- Closing value: what the stock is worth at year end.
The program takes the balance of the 3x account as opening stock and builds the journal entry that brings it to its Closing value, with the difference against the change in stock account.
If your company keeps batches or serial numbers, the Value stock by batches/serial numbers link appears. It calculates the value at average price and shows it to you so you can copy it into Closing value. It doesn’t type it in for you.
How do I close the financial year?
- Go to Accounting > Operations and choose the Financial year.
- Fill in the stock, if there is any.
- Click Close financial year. The question Close financial year … and lock its periods? appears.
- Confirm with Yes, close.
When it finishes, a summary appears with the financial year’s result and the details of what has been created.
Closing twice doesn’t duplicate anything. If you click again, the program detects that the journal entries already exist and replies that the financial year was already closed.
What exactly happens when I close?
Closing does four things at once. If any of them fails, none of them is done: the financial year stays as it was.
- Stock adjustment, if you have filled any in. It brings each warehouse account to its closing value against its change in stock account.
- Profit and loss: all the expense and income accounts, groups 6 and 7, are cleared against the financial year’s profit or loss account.
- Closing: all the accounts that still have a balance are brought to zero. Customer and supplier accounts too.
- Locking the periods: the twelve months are closed, and so is the closing period.
The three journal entries don’t go to December: they go to a separate period, 13 · Closing. That is why the balance sheet and the profit and loss account ‘up to month 12’ still show figures after closing, instead of coming out at zero.
Locking the months affects both the journal entries and the VAT registers. It is the same closing for both.
How do I open the next financial year?
The opening is on the same Operations screen, on the Financial year opening card. It creates the new year’s opening journal entry from the previous year’s closing balances.
- At the top, in Financial year, leave selected the already closed financial year whose balances you want to carry forward.
- Type the new year in Target financial year.
- Click Open … and confirm with Yes, open.
The opening journal entry is the exact mirror of the closing one, with Debit and Credit swapped, and it carries the start date of the target financial year. It restores the balance sheet accounts just as they were left, including the profit or loss account and those of each customer and supplier. Expenses and income aren’t carried forward: they were cleared in the closing.
The target financial year is created automatically if it didn’t exist. Opening twice doesn’t duplicate anything.
The source must be closed. If it isn’t, the program warns you to close it first.
If your company keeps batches or serial numbers, the Stock opening by batches and serial numbers card also appears. Stock doesn’t depend on the financial year and carries on by itself; that operation only records the opening snapshot and clears out the batches that are already at zero.
How do I take uninvoiced orders and delivery notes into the new year?
The opening carries the balances forward. Half-finished work is taken separately, with the Carry-forward of open documents to … card, on the same Operations screen.
It is needed because documents belong to a financial year: as soon as you go into the new year, the old year’s order or delivery note that you haven’t invoiced yet stops appearing in the lists. It isn’t that it can’t be invoiced: it’s that you can’t see it.
- At the top, in Financial year, leave the old year. In Target financial year, the new one.
- Click See what would be carried forward. You get the count by document type, with its amount.
- Review the Numbering series it suggests (explained further down).
- Click Carry forward to … and confirm with Yes, carry forward.
The documents are moved to the new year: they keep their number, their date and their lines, and stay linked to whatever was done from them. No new document is created and no numbering is used up. In return, that order is no longer listed in the closed year, which is where you no longer need it.
What is moved: quotes, supplier quotes, service and production orders, orders and delivery notes that are in draft or confirmed, for both sales and purchases.
What happens if an order is partly delivered. What is still live is moved and what is already closed stays, so a chain can end up split between the two years: an order served in two delivery notes, one already invoiced that stays and another not invoiced that travels to the new year. That is normal and is catered for:
- The delivery note that travels can be invoiced in the new year quite normally.
- If you void it, it returns its share of the outstanding quantity to the order, whichever year the order is in. The other delivery note’s share isn’t touched.
- The old year’s order is still protected: it can’t be voided or reduced while anyone has taken quantity from it.
What is never moved:
- Invoices and credit notes. They belong to the year in which they were issued and moving them would falsify the books.
- Delivery notes already invoiced, and anything voided. There is nothing outstanding left to take.
- Warehouse, inventory and production movements. They are the year’s history, not half-finished work.
- Stock. It doesn’t depend on the financial year: it carries on by itself.
- Open items. Outstanding instalments don’t depend on the financial year either: they stay in open items after closing, and are collected just the same. The card tells you how many there are so you don’t look for them in the list of things to move.
Carrying forward twice doesn’t move anything else: the second time there is nothing left in the old year.
How do I change the numbering when the year starts?
On the same card, Numbering series for …. If any of your series has the year in its name —a 2025 series for invoices—, the program suggests creating the equivalent for the new year, 2026, starting from number 1.
- They come ticked: untick them if you don’t want them.
- The new series inherits the old one’s format (the padding zeros, the prefix and the suffix).
- The new series becomes the default for its type, and last year’s stops being the default. Without that, you would carry on numbering with last year’s series and creating it would be no use.
- If your series doesn’t have the year (
A,FAC…), nothing is suggested: the numbering carries on as it is.
A series that already exists is respected: it isn’t duplicated and its counter isn’t touched.
How do I undo a carry-forward?
With Undo carry-forward, on the same card. It returns to the old year the documents the carry-forward took, and leaves where they are those that were created in the new year (it tells them apart by their date).
The series created aren’t deleted: they may have numbers already issued, and deleting the counter would leave documents without their series. If you don’t need them, deactivate them by hand in document series.
How do I undo a closing or an opening?
Both buttons are in Accounting > Operations, next to their operation.
Undo closing reopens the months of the financial year and reverses the journal entries of the closing period. It asks for confirmation with Undo the closing of … (reverses journal entries and reopens periods)?.
There is a compulsory order: if the next financial year has already been opened, the program won’t let you undo the closing and tells you to undo its opening first. The reason is that the opening is a copy of the closing; if the closing is deleted and the opening is left, the new year’s balances no longer have an origin.
Undo opening of … reverses the target financial year’s opening journal entry. If its month was closed, it reopens it so it can do so.
Undoing isn’t an emergency operation and doesn’t leave a messy trail: it is designed for correcting a closing done with incomplete data and running it again.
How do I close or reopen a single month?
In Accounting > Operations, the last card is Periods of financial year …. It has the twelve months plus 13 · Closing, each with its button: Close if it is open, Reopen if it is closed.
Closing a month is for freezing that month’s already reviewed accounts without waiting for the year-end closing. From then on:
- New journal entries dated in that month can’t be recorded.
- Changing or deleting a journal entry in that month no longer changes it: it creates a corrective journal entry dated today.
- The bulk change skips those journal entries and counts them as skipped.
The same lock applies to that month’s VAT registers.
Reopening a month is immediate and doesn’t reverse anything that was done while it was closed. The corrective entries that were created stay where they are.
With the financial year closed, a single month can’t be reopened: its closing entries already count on what each month holds. Undo the closing of the financial year first.
If something goes wrong
| What you see | What has happened | What to do |
|---|---|---|
| ‘Financial year … does not exist’ | That year hasn’t been set up in the company | See create a financial year |
| ‘The closing journal entry … does not balance’ | There are unbalanced journal entries in the financial year | Click Check financial year and correct them before closing |
| ‘Financial year … is not closed: close it before opening’ | You are trying to open without having closed the previous one | Close the source financial year first |
| ‘Financial year … already has an opening based on this closing’ | You want to undo a closing that has already been opened | Undo the next year’s opening first |
| ‘Financial year … was already closed’ | You have closed twice | Nothing happens: no new journal entry has been created |
| ‘Financial year … is closed: undo its closing first to reopen one of its periods’ | You want to reopen a month of a year that is already closed | Undo the closing of the financial year and then reopen the month |
| ‘Period … is closed: it does not accept journal entries’ | You are recording with a date in a closed month | Change the date, or reopen the month in Operations |
| The balance sheet comes out unbalanced and the check finds no unbalanced journal entry | The general ledger doesn’t match the journal lines | A General ledger row appears in the check: click Rebuild the general ledger |
| After closing, the balance sheet comes out at zero | You are looking at the closing period instead of month 12 | Set To month to 12 |
| I can’t see an order from last year that hasn’t been invoiced | Documents belong to a financial year and the old year’s one can’t be seen from the new one | Bring it over with Carry-forward of open documents |
| ‘Financial year … does not exist in this company: create or open it before transferring’ | The target year hasn’t been set up | Open it first, or create it in create a financial year |
| New invoices still come out with last year’s series | The new series wasn’t created, or wasn’t made the default | Go back to See what would be carried forward and tick the new year’s series |
See also: Produce the balance sheet and profit and loss account · Find and correct journal entries · Make a manual journal entry
More about Accounting
- How do I depreciate fixed assets?
- How do I find a journal entry and correct it?
- How do I view an account’s general ledger?
- How do I add a ledger account?
- How do I define the line items of the balance sheet and the income statement?
- How do I make a manual journal entry?
- How do I print or export what I see in accounting?
- How do I assign costs by department and by project?
- Keeping the accounts
- How do I write the notes to the annual accounts?
- What is the accounting dashboard?
- How do I allocate indirect costs?